Construction Engineering Assignment Example | Topics and Well Written Essays - 1500 words

Construction Engineering - Assignment Example Whether or not a power plant can be built on a specific location is determine by carrying out technical surveys based on following recommendations. Supply of raw material to the place is convenient .i.e. the construction site is provided by roads to transport goods to that part of the area. Must have ample space to accommodate construction machinery. Must have proper area for dumping mud extracted from the construction site. Quebec is rich in places that are suitable for the construction of power plant. For the construction of such a facility in Quebec, following considerations are followed. Facility must be having environmental conditions that support the construction and running of power plant, e.g. Most of the year temperature should be below freezing point and less prone to tornadoes. Facility must be having suitable area for the construction of such a large project. It is better to choose the facility near geysers; therefore, less fuel will be required. Location selected must be close to the facility, so that less investment is required to lay down the electric cable system and less line losses are build. Before establishing such a huge project, most important thing is to carry out economic analysis. To keep the plant running after start up, its economic analysis must be done before time. Here are few most important aspects of carrying out the analysis. The total investment must not exceed the revenue plant is going to generate in its life span, but it should be less enough to overcome its maintenance charges as well as gives profit to the state. Plant should have least transportation charges of fuel and less cabling should be required to furnish the area with electricity produced. Question 2 What data would be required and how would it be collected/obtained/determined for question 1 above? The data for question 1 can be collected by dividing the whole task in a number of parts. First of all, basic information can be obtained by surveying already working p ower plants in Quebec. It needs thorough survey of all the power plants already working in that area. This survey includes detailed review of the operational complexities faced by already functional power plants, in terms of local environmental conditions and geographical issues. Annual reports generated by all the plants must be viewed thoroughly in order to get the idea how the output from the plant is being affected by the choice of location and other factors. All this is really helpful in getting exact data for the analysis carried out in question 1. Question 3 Part of your mandate is to prepare a manual of ‘Business Ethics’ for the Construction of this project. This manual would affect all engineering staff doing design and all construction contractors performing work on site. What key principles might you include in your manual? To follow Business Ethics or Code of Conduct while performing a task is a key to success as an individual as well as a company. Therefore , carrying out such a big project must also follow some codes of conduct that need to be applied on engineering staff, contractors and labors. Here is the list of most important business ethics that must be followed while carrying out this project(Vee and Skitmore). Construction drawings must not be stolen from any source rather a dedicated drawing for this specific thermal power plant must be produced. All of the construction errors must be reported